Get ExpressVPN on your router.
Potrzebujesz VPN dla swojego routera?
Zdobądź ExpressVPN teraz
Refer a friend to use ExpressVPN.
Uwielbiasz ExpressVPN? Chcesz miesiąc za darmo?
Poleć ExpressVPN znajomej osobie
Looking for a fast, secure VPN setup? If you have Linksys EA6200, WRT1200AC, WRT1900AC 13J1, WRT1900AC 13J2, WRT1900ACS, or WRT1900ACS V2, you can set up the ExpressVPN app for routers.

MediaStreamer is a DNS service designed to improve your streaming experience. If your device doesn’t natively support VPN, MediaStreamer is a great alternative for streaming.

To use MediaStreamer smoothly, you must register your IP address on the ExpressVPN website. This allows ExpressVPN to recognize your IP address and grant your device access to MediaStreamer.

Note: MediaStreamer is not a VPN and does not offer the privacy and security benefits of a VPN. You cannot change locations with MediaStreamer.

The following steps were tested on Linksys WRT 3200 ACM.

Jump to…

1. Register your IP address on the ExpressVPN website
2. Get your MediaStreamer IP addresses
3. Change the DNS settings on your Linksys router


1. Register your IP address on the ExpressVPN website

Go to the ExpressVPN DNS settings page. If prompted, enter your ExpressVPN credentials and click Sign In.

Enter your account credentials, then click "Sign In."

Enter the verification code that is sent to your email.

Under IP address registration, click Register my IP address. If it already reads “registered” next to your IP address, there is no need to select this option again.

Next to "My IP address," click "Register my IP address."

Toggle Automatically register my IP address on. This is recommended as it automatically tracks changes to your IP address.

Toggle "Automatically register my IP address" on.

If you have enabled Automatically register your IP address, you can keep your IP address updated by using the ExpressVPN app on your device or signing in to your ExpressVPN account occasionally.

Need help? Click here to contact the ExpressVPN Support Team via Live Chat

Back to top


2. Get your MediaStreamer IP address

Go to the ExpressVPN setup page. If prompted, enter your ExpressVPN credentials and click Sign In.

Enter your account credentials, then click "Sign In."

Enter the verification code that is sent to your email.

On the right, you will find the MediaStreamer DNS server IP address.

Under "Configure MediaStreamer," you will find the IP addresses for MediaStreamer.

Keep this browser window open. You will need this information for the setup later.

Need help? Click here to contact the ExpressVPN Support Team via Live Chat

Back to top


3. Change the DNS settings on your Linksys router

To access your router admin panel, go to 192.168.1.1 in your web browser. Sign in with your username and password (by default, both are admin).

If your router’s IP address was changed in the past and you cannot remember it, you can find it in your device’s settings.

In the left sidebar, click Connectivity.

In your router admin panel, click “Connectivity.”

In the top navigation bar, click Local Network.

Click “Local Network.”

For Static DNS 1 and Static DNS 2, enter the MediaStreamer IP addresses found earlier. Click Apply.

Click “Apply.”

Need help? Click here to contact the ExpressVPN Support Team via Live Chat

Back to top

Czy ten artykuł okazał się pomocny?

Przykro nam to słyszeć. Poinformuj nas, co możemy poprawić.

Which router model do you need help with?

Examples: Linksys WRT1200AC, Asus RT-AC56R

Członek naszego zespołu pomocy technicznej zajmie się Twoją sprawą.